Insulated Siding in Saskatoon
Foam-backed vinyl that turns a re-side into an insulation upgrade, aimed straight at the thermal bridging older prairie walls leak through.
A winter heating bill in this city is a wall problem as much as a mechanical one, and Saskatoon Siding Co installs insulated siding for exactly that homeowner: the one re-siding anyway who wants the new wall to work harder than the old one.
The Re-Side Moment Is the Insulation Moment
Adding exterior insulation to a finished wall never pencils out on its own, because the cladding has to come off to do it. That is why the right time to think about wall R-value is the moment you are already replacing siding. Insulated vinyl bonds rigid foam to the back of each panel, so the upgrade rides along with the re-side: same crew, same schedule, one incremental material cost, and continuous insulation over every stud in the wall when it is done.
Our install treats it as the envelope job it is. Sheathing exposed and inspected, house wrap repaired to continuous, penetrations sealed, and then the insulated panels hung with the same float-and-gap discipline as any vinyl wall, because foam backing does not repeal thermal expansion.
What It Feels Like From Inside
Owners mention the quiet first. Foam-backed walls damp wind noise and the traffic hum that hollow vinyl passes straight through, which surprises people in busy-street homes. The thermal difference shows up at the drafty spots first, north bedrooms and walls the wind works on, and across a January the heating system simply cycles less against a wall that leaks less.
For the older stock in areas like Caswell Hill and post-war Montgomery Place, where two-by-four walls were insulated to the standards of their decade, the upgrade is at its most persuasive. On new-build stock it is a comfort-and-stiffness buy, and we will say so plainly.
Every insulated-siding quote from us prices standard vinyl beside it, same wall, same trim, same eavestrough tie-in, so the upgrade is a decision you make with the delta in front of you.
What's Included
- Vinyl panels with contoured foam bonded behind the face
- Continuous exterior insulation over the studs
- Noticeably stiffer, flatter wall than hollow panels
- The re-side moment is the cheap moment to add wall R-value
- Quoted head-to-head against standard vinyl so the upgrade is a choice
Other Services We Offer in Saskatoon
Insulated Siding Questions
How does insulated siding actually help?
Wall studs conduct heat straight past the insulation between them, a path called thermal bridging, and in an older home that is a meaningful share of wall heat loss. Foam-backed siding lays continuous insulation over the entire wall face, studs included. It will not turn a 1970s wall into a new one, but it moves the whole wall in the right direction at the exact moment the cladding is off anyway.
Is it worth the extra cost over standard vinyl?
Ask what is behind your current siding before deciding. Older walls with thin cavity insulation get genuine thermal work out of the upgrade, every winter, for as long as the panels hang there. Newer, well-insulated walls mostly buy stiffness and quiet. Our quotes price the two builds side by side, so what you are weighing is a visible number, not a pitch.
Does the foam backing change how the wall looks?
For the better. The foam is contoured to the panel profile, so the face is supported everywhere and the wall reads flatter and more solid, closer to wood board than hollow vinyl. It also resists dings from the sort of casual impacts, hockey pucks included, that leave hollow panels wavy.
Can it go over my existing siding?
We strip to sheathing regardless. Burying old cladding traps its problems behind your new wall and voids the clean flashing details a good install depends on. Stripping also lets us see the house wrap and fix what forty winters did to it, which on this job matters more than usual because insulation and airtightness work as a pair.
Get a Free Insulated Siding Quote
One site visit, one itemized written scope, zero mystery. That is how a siding quote should read.